Match Amp & harness PP62DSP+Harness+Helix F 62C Component Upgrade Toyota

Brand
Match

Product description

Match Amp & harness PP62DSP + Harness + Helix F 62C Component Upgrade Toyota


Complete Amp / DSP Upgrade with no wiring needed, Complete direct fit , Upgrade your System with this perfectly balanced system

Package to include

1 x Match PP62DSP including (PP-ISO 2)
1 x car specific harness ( please provide Model and year )
1 x Helix F 62C component speaker set
1 x Set of speaker adaptors and rubber flanges
1 x Set sound deadening kit (as per photos)

Other options available

Speaker packages also Available

Match PP62DSP

The PP 62DSP provides everything an up-to-date Plug & Play amplifier needs: easy installation and maximum flexibility.

Its installation effortlessly takes place via Plug & Play cable harness which is included in delivery - no cable has to be cut or modified. At www.audiotec-fischer.com the huge online sound setup database provides the appropriate setup.

The MATCH Extension Card (MEC) slot makes it possible to expand the PP 62DSP's functionality by inserting an optional MEC module - for example a Bluetooth® Audio Streaming module, an optical digital input or a High Resolution Audio USB soundcard. In addition the PP 62DSP offers the option of hooking up additional amplifiers using the two channel pre-amp output.

Sound enthusiasts get their money´s worth as well - thanks to the professional and user-friendly Audiotec Fischer DSP PC-Tool software it becomes amazingly easy to create individual sound setups. Furthermore the PP 62DSP is optionally configurable as a 6-channel amplifier with a total of 8 DSP channels. Due to the numerous adjustment options it leaves nothing to be desired.

Simple Plug & Play connection to original sound systems using vehicle-specific adapter cables
MATCH Extension Card (MEC) slot for additional input modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.
Extremely powerful "fixed point" Audio DSP with 56 Bit resolution
Large database of car-specific setups available online
Optionally configurable as 6-channel amplifier with a total of 8 DSP channels
Freely configurable 2-channel PreOut for the connection of additional amplifiers
Adjustable input sensitivity from 11V to 5V
Automatic remote switch
Smart highlevel input with ADEP.2 circuit
Highlevel input EQs
Control input for optional cable remote control
State-of-the-art SMD technology for a more compact design and maximum reliability
Four-layer printed circuit boards for best possible power and signal transmission

Special features:

MATCH Extension Card slot
It is possible to extend the functionality of the MATCH PP 62DSP amplifier by inserting an optional MATCH Extension Card (MEC) - for example a Bluetooth® Audio Streaming module, an optical digital input or an AUX input.

Smart highlevel input ADEP.2
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If an usual amplifier will be hooked up, failure messages and loss of specific features (e.g. fader function) are often the result. Additionally new power stage concepts in some radios may cause asymmetrical output signals which lead to distortion in the AD converters.
The new ADEP.2 circuit (Advanced Diagnostics Error Protection, 2nd generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Power Save Mode
The "Power Save Mode" is incorporated in all car-specific setups as well as in the basic setup of the DSP PC-Tool software. It allows to significantly reduce the power consumption of the PP 62DSP (or any additional connected amplifier) once there's no input signal for more than 60 seconds. Please note that in many up-to-date cars with "CAN" or any other internal bus structures it may happen that the car radio (and therefore the PP 62DSP as well) remains "invisibly" turned on for up to 45 min. after leaving the car!
Once the "Power Save Mode" is active the output stages of the PP 62DSP and its remote output will be turned off, thus reducing current draw to less than 250 mA. The amp will turn again to full operation within 2 sec. if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the "Power Save made" via the DSP PC-Tool.

MicroSD
The MicroSD card reader allows to easily configure the DSP inside the amplifier without the need of directly connecting a personal computer. A large number of car-specific setups is available for free on www.audiotec-fischer.com.
Simply download your desired setup and copy it to any MicroSD card. Finally insert the MicroSD card into the PP 62DSP and the copy process will start automatically. After that the amplifier is perfectly programmed to dramatically upgrade the sound quality of your car factory audio system.

Output power RMS / max.
- @ 4 Ohms4 x 35 / 70 Watts (Font/Rear channels)
- @ 2 Ohms4 x 50 / 100 Watts (Font/Rear channels)
- @ 1 Ohm-
- bridged @ 4 Ohms-
- bridged @ 2 Ohms-
- Subwoofer output @ 4 Ohms-
- Subwoofer output @ 2 Ohms1 x 160 / 320 Watts (4 channels each 40 / 80 Watts)
Amplifier technologyClass AB
Inputs4 x Highlevel speaker input
1x MEC
1 x Remote In
Input sensitivityHighlevel 5 - 11 Volts
Input impedance RCA / Cinch-
Input impedance highlevel13 Ohms
Outputs8 x Speaker output
2 x RCA / Cinch
1 x Remote Out
Output voltage RCA / Cinch3 Volts RMS
Frequency response20 Hz - 22,000 Hz
DSP resolution56 Bit
DSP power172 MHz
Sampling rate48 kHz
DSP typeAudio signal processor
Signal convertersA/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input-
Signal-to-noise ratio analog input103 dB (A-weighted)
Distortion (THD)< 0.01 %
Damping factor> 100
Operating voltage10.5 Volts (max. 5 sec.down to 6 Volts)
Current draw670 mA
Max. remote output current500 mA
Fuse1 x 20 A Maxi-fuse (APX)
Additional featuresVariable input sensitivity, fully stabilized internal power supply with Start-Stop capability, 56 Bit digital signal processing, internal memory for 2 different sound setups, USB input, ADEP.2 circuit, Auto Remote switch, MEC slot, input for optional remote control, stereo line outputs with balanced output transformers (floating ground)
Dimensions (H x W x D)44 x 185 x 139 mm /
1.73 x 7.28 x 5.47"

Immerse yourself in the world of HELIX sound with the new F loudspeaker series. The combination of proven components and cutting-edge materials guarantees a great sound experience with rich bass, accurate mids and detailed highs.

During development special attention was paid to an easy integration into the vehicle. In addition to the low installation depth, the innovative, two-part "Flex-Crossover" in particular offers much more freedom in terms of connectivity and installation. Thus the F loudspeakers are the first choice especially if the tweeters and woofers are separately installed in the door and A-pillar.

The elegant design underlines the qualities at first glance. Thus, the bass drivers of this series present themselves in a stylish, elegant design with matt black HELIX cone finish and shiny black HELIX-logo.


Power RMS / max.60 / 120 Watts
Frequency response55 Hz - 22,000 Hz
Impedance3 Ω
Efficiency 1 W / 1 m91 dB
Cone materialTW: Silk dome
M:
W: Injected polypropylene with embedded carbon fibers
CrossoverSeparate, 12/12 dB slope and tweeter protection
Outer diameterTW: 52.6 mm / 2.07"
M: -
W: 165 mm / 6.50"
Installation diameterTW: 45 mm / 1.77"
M: -
W: 142 mm / 5.59"
Installation depthTW: 17.3 mm / 0.68"
M: -
W: 61 mm / 2.40"
Dimensions crossoverTweeter: 51.5 x 27.5 x 20.5 mm / 2.03 x 1.08 x 0.81"
Woofer: 57 x 27.5 x 23.5 mm / 2.24 x 1.08 x 0.93"


Specifications

Brand
Match