HELIX DSP PRO MK2 High-Res 10-channel signal processor with Director Control RRP £939.99

HELIX DSP PRO MK2 High-Res 10-channel signal processor with Director Control RRP £939.99
HELIX DSP PRO MK2 High-Res 10-channel signal processor with Director Control RRP £939.99
HELIX DSP PRO MK2 High-Res 10-channel signal processor with Director Control RRP £939.99
HELIX DSP PRO MK2 High-Res 10-channel signal processor with Director Control RRP £939.99
HELIX DSP PRO MK2 High-Res 10-channel signal processor with Director Control RRP £939.99
Brand
Helix

Product description

HELIX DSP PRO MK2 High-Res 10-channel signal processor with Director Control
DIRECTOR
Everything under control!
With the new remote control DIRECTOR you lead from the front!
The 2.8" / 7 cm full - colour touchscreen display and the intuitive menu navigation allow an easy handling of many features - for example the volume control of all sources, volume control of the subwoofer, source selection, control and configuration of the HEC BT module or switching between sound setups. Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processor/amplifier is hidden somewhere in the trunk.
The high-resolution colour touchscreen is embedded in an exclusive solid aluminium housing.
The DIRECTOR is compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher.
2.8" / 7 cm touchscreen display and powerful ARM processor
Easy handling of the main functions
- Volume control of all sources
- Volume control of the subwoofer
- Source selection
- Control of the HEC BT module (Bluetooth® Connect functions: pairing, reconnect, disconnect / Bluetooth®
Control functions: track forward/back, play/pause)
- Switching between sound setups
Memory locations for 20 additional sound setups
Automatic dimming function of the display
Display rotation adjustable to 180°
USB Paththrough - to connect your computer to the DSP
Compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher
Exclusive solid aluminum housing
17' / 5.2 m connection cable included
Dimensions (H x W x D)
53.50 x 135 x 18 mm;
2.07 x 5.32 x 0.71"
HELIX DSP PRO MK2
High Resolution audio at its best!
Thanks to numerous improvements the new HELIX DSP PRO MK2 raises the bar to a new level, not only in terms of sound quality.
Besides the extremely powerful 64 Bit Audio DSP, cutting-edge DA and AD converters with an incredible native resolution of 32 Bit ensure unparalleled sound characteristics. The improved internal power supply as well as the increased maximum output voltage of 8 Volts contribute to the enhanced sound quality of this stunning processor.
Further innovations like the ADEP circuit (Advanced Diagnostics Error Protection) in the highlevel input for circumventing factory-made loudspeaker diagnostic systems, the "Auto Remote" switch for activating / deactivating the automatic turn-on feature of the highlevel input and the software-controlled switch between the optical and coaxial input have been added.
Of course, the HELIX DSP PRO MK2 provides a HELIX Extension Card slot (HEC slot). This allows adding further interfaces like a Bluetooth® Audio Streaming module or a High Resolution Audio USB soundcard. In terms of design, the DSP PRO MK2 shows up with the HELIX-like clean look and offers perfect preconditions for a fast and simple integration.
But not only the hardware has been improved - the software as well has been completely revised. Features like the allpass filter option, the increased adjustment range of the time alignment and the switchable sound options of the DA converters are solely a few examples. Despite its extended feature set the configuration of the DSP couldn't be easier thanks to the new DSP PC-Tool V4, which leaves nothing to be desired due to its numerous sound optimization options.
No doubt - the HELIX DSP PRO MK2 will again make dreams of the most ambitious sound enthusiasts come true - that´s a safe bet!
Extremely powerful "fixed point" Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second
AD and DA signal converters of the latest generation with a native resolution of 32 Bit
High Resolution audio bandwidth up to more than 40 kHz for unrivalled sound quality
HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.
Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection)
Start-Stop capability down to 6V supply voltage
Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
"Ground lift" switch to avoid ground loops
Control input for connecting remote controls and accessories
Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
Outputs: 10 x RCA/Cinch with max. 8 Volts output voltage
Note: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.
96 kHz sampling rate
The HELIX DSP PRO MK2 allows to handle all signals with the doubled sampling rate of 96 kHz. Thus the audio bandwidth is no longer limited to usual values like 22 kHz but allows an extended frequency response to more than 40 kHz. Doubling the sampling rate requires significantly higher DSP power as the number of possible arithmetic operations is halved. Only the implementation of the latest DSP chip generation allows raising the sampling rate to 96 kHz and adding new features plus additional channels at the same time.
Signal converters with a native resolution of 32 Bit
The HELIX DSP PRO MK2 uses high-class AD and DA converters of the latest generation with a native resolution of 32 Bit instead of the common 24 Bit. The result is an unprecedented precision in signal conversion that especially optimizes the sound quality at lower signal levels.
Smart highlevel input
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common signal processor will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appears - but not with the DSP PRO MK2. The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
Start-Stop capability
The switched power supply of the HELIX DSP PRO MK2 assures a constant internal supply voltage even if the battery's voltage drops to 6 Volts during engine crank.
Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DSP PRO MK2 once there's no input signal present for more than 60 seconds. Please note that in many up-to-date cars with "CAN" or any other internal bus structures it may happen that the radio remains "invisibly" turned on for up to 45 min. even after locking and leaving the car! Once the "Power Save Mode" is active the remote output and therefore the connected amplifiers will be turned off. The HELIX DSP PRO MK2 will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the "Power Save Mode" via the DSP PC-Tool software.
Automatic Digital Signal Detection
Switching from analog input to one of the digital inputs is done automatically as soon as a signal is detected
on the Optical Input or Coax Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.
Inputs8 x RCA / Cinch
8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote In
Input sensitivityRCA / Cinch 2 - 4 Volts
Highlevel 5 - 10 Volts or 10 - 20 Volts
Outputs10 x RCA / Cinch
1 x Remote Out (max.500 mA)
Output voltage8 Volts
Frequency response10 - 44,000 Hz
DSP resolution64 Bit
DSP power295 MHz
1.2 billion MAC operations per second
Sampling rate96 kHz
Signal convertersA/D: Asahi Kasei 32 Bit
D/A: Asahi Kasei 32 Bit
Signal-to-noise ratio
(A-weighted)116 dB (digital input)
110 dB (analog input)
Distortion (THD+N)< 0.0005 % (digital input)
< 0.001 % (analog input)
Crosstalk> 90 dB
Operating voltage9.6 - 18 Volts (5 sec. down to 6 Volts)
Additional featuresHEC slot, Ground lift switch, Control Input, ADEP circuit, Auto Remote switch
Dimensions (H x W x D)
Contents40 x 177 x 150 mm / 1.58 x 6.97 x 5.91"
1 x HELIX DSP PRO MK2
1 x USB cable
1 x Mounting material
1 x Instruction manual

Specifications

Brand
Helix